Chemicals

Arven Chemicals specialises in the manufacture of chemicals for the cleaning, janitorial, maintenance and production sectors.

As well as providing liquid and non liquid chemicals, Arven are also able to provide a wide range of aerosols.

The range of chemical products can be filtered as follows:

Liquids
Non Liquids
Aerosols

D-Grease – Heavy Duty Degreaser

D-Grease

Heavy Duty Degreaser

Formulated to remove grease and sludge from metal, concrete and many other surfaces.

The Benefits

  • D-Grease comes in a highly concentrated form with no need for hard scrubbing or rubbing.
  • D-Grease sets to work immediately, even on well congealed Oil and Grease. Lighter coatings will dissolve almost at once.
  • D-Grease is biodegradable.
  • D-Grease can be diluted 10-1 with Paraffin, Gas oil or Diesel, making it very economical to use.

Where to use

D-Grease has been formulated for use in Garages, Workshops, Engineering companies and out on site to remove Grease, Sludge, Oil and many other types of dirt from Engines, Machinery, Storage tanks and Concrete.

How to use

D-Grease is very easy to use. Simply spray or brush onto the area to be cleaned. Allow to penetrate and wipe or rinse off with water. 

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Grease Plus – Micro Emulsion Degreaser

D-Grease Plus

Micro Emulsion Degreaser
 
The Benefits

  • D-Grease Plus is 100% water soluble alleviating disposal problems.
  • D-Grease Plus contains no hydrocarbon solvents.
  • D-Grease Plus has no volatile organic compound. (V.O.C.s)

Where to use

D-Grease Plus is recommended For use in all above outlets and where a solvent free, quickly biodegradable product is required.

How to use

D-Grease Plus is very easy to use. Simply spray or brush onto the area to be cleaned. Allow to penetrate and wipe or rinse off with water. 

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Grease R – Recyclable Degreaser

D-Grease R

Recyclable Degreaser

Designed to be an Environmentally safe and powerful degreaser.

The Benefits

  • D-Grease R safely removes Sludge, Oil and Grease from Components, Small parts, Motors, Chains and Gearboxes
  • D-Grease R has a low odour.
  • D-Grease R with a flash point of 77° C, is safer to use.
  • D-Grease R is a recyclable degreaser.
  • D-Grease R reduces the amount of waste emitted into the environment.
  • D-Grease R is recommended for use through the
  • Arven Chemicals D-Grease Unit / Parts Washer
  • D-Grease R requires no hazard warning labels.

Where to use

D-Grease R will clean and degrease all small components produced throughout the Engineering industry.

D-Grease R can be used in many outlets, such as Garages, Maintenance departments, Local councils, Shipyards and the Aircraft servicing industry.

How to use

D-Grease R when used manually. Simply spray or brush onto the components or area to be cleaned. Allow to penetrate and wipe or rinse off.

D-Grease R when used through the D-Grease Unit / Parts Washer, is extremely effective in keeping down labour and equipment costs The brush attachment means you can clean parts faster and the D-Grease R is continually recycled.

Full instructions are on the Drum.

Further information on the Arven Chemicals D-Grease Unit / Parts Washer is available on request.

Enquire

To buy or enquire about a product call:
01928 576262

D-Scale LF – Rust Scale & Algae Remover

D-Scale LF

Rust, Scale & Algae Remover

Specially formulated to remove lime scale, rust and algae deposits from most metals.

The Benefits

  • D-Scale LF is Non-toxic and Non-flammable. 
  • D-Scale LF is a low foam formulation.
  • D-Scale LF is safe on most paint finishes and is easy on the hands.
  • D-Scale LF can be diluted 4-1 making it very economical.

Where to use

  • D-Scale LF is highly recommended for the removal of Rust, Scale and other deposits from Showers, Steam cleaners, Metals and Roof lights. It also cleans Water lines, Air conditioning and Cooling coils.
  • D-Scale LF is used in the Roof tile manufacturing industry to clean Vacuum pumps, Sieves, Slurry pumps and Slurry storage tanks.
  • D-Scale LF will remove Algae and Scale from Boilers, Sterilisers, Swimming pools and Chlorinators. Rubber marks on walls and floors are also easily removed.

How to use

D-Scale LF is easy to use. Spray or brush the area to be treated, allow to soak and rinse off with clean water.  

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Silt A & C – Drain Cleaner Penetrant and Flocculent

D-Silt A & C

Drain Cleaner Penetrant and Flocculent
 
The Benefits

  • D-Silt A is completely Non-toxic, Non-flammable and safe on the skin.
  • D-Silt A is safe in Sewers and Septic tanks.
  • D-Silt A has a dilution rate of over 100-1 making it extremely economical.
  • D-Silt A frees drains blocked by Silt, Mud and Clay.
  • D-Silt C is completely Non-toxic, Non-flammable and safe on the skin.
  • D-Silt C has a fast settling rate to increase.
  • Throughput yield and separation efficiency.

Where to use

  • D-Silt A is recommended for use in all industries for the regular servicing of storm and foul drains.
  • D-Silt A lifts the silt from the bottom of drains. The flocculent action holds it in suspension, prior to flushing away.

How to use

D-Silt A is very easy to use. Simply pour 10 litres per 300 metres of 30 centimetre pipe and flush through with plenty of water.

Enquire

To buy or enquire about a product call:
01928 576262

D-Sperse – Oil Dispersion Solution

D-Sperse

Oil Dispersion Solution

Formulated to control the spillage of oil, petrol and other flammable solvents.

The Benefits

  • D-Sperse cleans Oil from Tarmac, Bitumen and many other surfaces.
  • D-Sperse eliminates fire and slip hazards.
  • D-Sperse dilutes 6-1 with water for economical usage.
  • D-Sperse is Non-toxic, Non-flammable and safe on all hard surfaces.
  • D-Sperse is biodegradable and has no harmful effect on the natural bacteria in Sewage systems or Septic tanks.

Where to use

D-Sperse is highly recommended for use in Oil companies, Power stations, Local councils, Tank storage farms, Garage forecourts, Fire brigades, Docks & Harbour authorities and all other industrial users of oils and solvents.

How to use

  • Spillage of petrol and flammable solvents on water.
  • D-Sperse is very easy to use. Simply dilute between 4 and 6-1 with water, spray the solution onto spillage with high pressure water or propellants to create an emulsion.
  • Spillage of petrol and flammable solvents on hard surfaces.
  • D-Sperse should be diluted as above and be sprayed or poured over the spillage at a rate of 1litre per 2 square meters. Agitate with a stiff brush and hose away using a large quantity of water.
  • If the spillage is large, use a fire hydrant with a “Venturi” type nozzle where available.
  • When spillages occur, you must act fast. It is recommended that you keep stocks of D-Sperse on hand at all times.

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262