D-Grease R – Recyclable Degreaser

D-Grease R

Recyclable Degreaser

Designed to be an Environmentally safe and powerful degreaser.

The Benefits

  • D-Grease R safely removes Sludge, Oil and Grease from Components, Small parts, Motors, Chains and Gearboxes
  • D-Grease R has a low odour.
  • D-Grease R with a flash point of 77° C, is safer to use.
  • D-Grease R is a recyclable degreaser.
  • D-Grease R reduces the amount of waste emitted into the environment.
  • D-Grease R is recommended for use through the
  • Arven Chemicals D-Grease Unit / Parts Washer
  • D-Grease R requires no hazard warning labels.

Where to use

D-Grease R will clean and degrease all small components produced throughout the Engineering industry.

D-Grease R can be used in many outlets, such as Garages, Maintenance departments, Local councils, Shipyards and the Aircraft servicing industry.

How to use

D-Grease R when used manually. Simply spray or brush onto the components or area to be cleaned. Allow to penetrate and wipe or rinse off.

D-Grease R when used through the D-Grease Unit / Parts Washer, is extremely effective in keeping down labour and equipment costs The brush attachment means you can clean parts faster and the D-Grease R is continually recycled.

Full instructions are on the Drum.

Further information on the Arven Chemicals D-Grease Unit / Parts Washer is available on request.

Enquire

To buy or enquire about a product call:
01928 576262

D-Scale LF – Rust Scale & Algae Remover

D-Scale LF

Rust, Scale & Algae Remover

Specially formulated to remove lime scale, rust and algae deposits from most metals.

The Benefits

  • D-Scale LF is Non-toxic and Non-flammable. 
  • D-Scale LF is a low foam formulation.
  • D-Scale LF is safe on most paint finishes and is easy on the hands.
  • D-Scale LF can be diluted 4-1 making it very economical.

Where to use

  • D-Scale LF is highly recommended for the removal of Rust, Scale and other deposits from Showers, Steam cleaners, Metals and Roof lights. It also cleans Water lines, Air conditioning and Cooling coils.
  • D-Scale LF is used in the Roof tile manufacturing industry to clean Vacuum pumps, Sieves, Slurry pumps and Slurry storage tanks.
  • D-Scale LF will remove Algae and Scale from Boilers, Sterilisers, Swimming pools and Chlorinators. Rubber marks on walls and floors are also easily removed.

How to use

D-Scale LF is easy to use. Spray or brush the area to be treated, allow to soak and rinse off with clean water.  

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Silt A & C – Drain Cleaner Penetrant and Flocculent

D-Silt A & C

Drain Cleaner Penetrant and Flocculent
 
The Benefits

  • D-Silt A is completely Non-toxic, Non-flammable and safe on the skin.
  • D-Silt A is safe in Sewers and Septic tanks.
  • D-Silt A has a dilution rate of over 100-1 making it extremely economical.
  • D-Silt A frees drains blocked by Silt, Mud and Clay.
  • D-Silt C is completely Non-toxic, Non-flammable and safe on the skin.
  • D-Silt C has a fast settling rate to increase.
  • Throughput yield and separation efficiency.

Where to use

  • D-Silt A is recommended for use in all industries for the regular servicing of storm and foul drains.
  • D-Silt A lifts the silt from the bottom of drains. The flocculent action holds it in suspension, prior to flushing away.

How to use

D-Silt A is very easy to use. Simply pour 10 litres per 300 metres of 30 centimetre pipe and flush through with plenty of water.

Enquire

To buy or enquire about a product call:
01928 576262

D-Sperse – Oil Dispersion Solution

D-Sperse

Oil Dispersion Solution

Formulated to control the spillage of oil, petrol and other flammable solvents.

The Benefits

  • D-Sperse cleans Oil from Tarmac, Bitumen and many other surfaces.
  • D-Sperse eliminates fire and slip hazards.
  • D-Sperse dilutes 6-1 with water for economical usage.
  • D-Sperse is Non-toxic, Non-flammable and safe on all hard surfaces.
  • D-Sperse is biodegradable and has no harmful effect on the natural bacteria in Sewage systems or Septic tanks.

Where to use

D-Sperse is highly recommended for use in Oil companies, Power stations, Local councils, Tank storage farms, Garage forecourts, Fire brigades, Docks & Harbour authorities and all other industrial users of oils and solvents.

How to use

  • Spillage of petrol and flammable solvents on water.
  • D-Sperse is very easy to use. Simply dilute between 4 and 6-1 with water, spray the solution onto spillage with high pressure water or propellants to create an emulsion.
  • Spillage of petrol and flammable solvents on hard surfaces.
  • D-Sperse should be diluted as above and be sprayed or poured over the spillage at a rate of 1litre per 2 square meters. Agitate with a stiff brush and hose away using a large quantity of water.
  • If the spillage is large, use a fire hydrant with a “Venturi” type nozzle where available.
  • When spillages occur, you must act fast. It is recommended that you keep stocks of D-Sperse on hand at all times.

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Tar – Asphalt Bitumen & Tar Remover

D-Tar

Heavy Duty Asphalt, Bitumen & Tar Remover

Modern formulation designed to remove all forms of oil based deposits from most surfaces.

The Benefits

  • D-Tar cleans without staining.
  • D-Tar dilutes 4-1 with paraffin, making it very economical.
  • D-Tar removes Heavy Oil from Concrete floors, Paved driveways etc.
  • D-Tar will remove Tar and Bitumen from paintwork on all vehicles.
  • D-Tar requires only a fine spray to remove all types of dirt.

Where to use

D-Tar can be used in all industries where spillages of Oil, Tar and Bitumen cause a problem such as Garages, Petrochemical companies, Power stations, Fire brigades, Docks and Harbour authorities Building sites and Road surfacing outlets.

D-Tar is also recommended for use in Roofing companies for cleaning and removing old Tar and Bitumen before re-roofing.

D-Tar will completely remove Tar and Bitumen spillages from new buildings, therefore saving on the very costly exercise of replacing brickwork.

How to use

D-Tar is very easy to use. Simply spray or pour on to the surface to be cleaned. Allow to penetrate and hose off with water. To remove heavier deposits, spray or pour on to the surface and brush in before hosing off with water.

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

D-Weed – Non-Selective Weed Control

D-Weed

Sodium Chlorate

Non-Selective weed control.

The Benefits

  • D-Weed kills all forms of weeds.
  • D-Weed is Non-flammable.
  • D-Weed will kill all plant growth, therefore avoiding contamination of lawns and flower beds.

Where to use

  • D-Weed is designed for use in a wide range of situations where the control of weeds is essential.
  • D-Weed can be used on pathways and drives around buildings prior to laying asphalt or paving.
  • D-Weed is especially recommended for use by Local councils and Industrial parks where roads and pathways require regular, bi-annual maintenance.

How to use

  • D-Weed is very easy to use. Simply add D-Weed to water with constant stirring until complete solubility is attained. This is essential to the effectiveness of the product.
  • D-Weed should be used between Spring and Autumn.

Recommended dilution rates are as follows –

All dilutions are approximately 10 sq Feet Per Litre.

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262