Aeroblast Aerosol – High Pressure Air Freshener

Aeroblast Aerosol

High Pressure Air Freshener

Designed to eliminate all odours over a large area to give long lasting freshness and protection.

The Benefits

Aeroblast can be used to deodorise large areas quickly and effectively.

Aeroblast gives long lasting protection from all odours including – Tobacco, Cooking Oils, Animal smells, Drains etc.

Aeroblast is very economical, only a short burst is required to cover a large area.

Where to use

Aeroblast is recommended for use in Airports, Tanneries, Abattoir’s, Conference halls, Clubs, Canteens and Sports arena’s and anywhere that offensive smells accumulate, i.e. Toilets, Changing Rooms, Kitchens etc.

How to use

Aeroblast is very easy to use, simply spray the contaminated area for a few seconds to produce a pleasant fragrance.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

A-Lube Aerosol – Chain & Cable Lubricant

A-Lube Aerosol

Superior Chain & Cable Lubricant

Formulated for use on heavy industrial equipment in use outdoor.

The Benefits

A-Lube penetrates to the core of Cables and Wire ropes to lubricate completely, it:

  1. Does not spray off moving Chains and Cables.
  2. Prevents Rust and Corrosion by leaving a protective coating.
  3. Contains Molybdenum Disulphide and is unaffected by changes in temperature.
  4. Reduces friction and gives longer life.

Where to use

A-Lube can be used on all types of machinery with Chains and Cables including Cranes, Chair lifts and Conveyer belts.

Particularly recommended for use in Lifting gear companies where Chains require regular servicing.

How to use

A-Lube is so easy to use. Simply spray onto the Chain or Cable and allow to penetrate.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

Anti-Seize Aerosol – Heat Stable Lubricant

Anti-Seize Aerosol

Heat Stable, Maximum Torque Lubricant

Formulated to provide protection at all temperatures.

The Benefits

  • Anti-Seize gives superior lubrication to Screw threads, Nuts and Bolts.
  • Anti-Seize reduces down time during regular maintenance.
  • Anti-Seize provides maximum Torque and reduces Friction.
  • Anti-Seize eliminates Pitting, Rusting, Thread distortion and Seizure.
  • Anti-Seize is Non-electrolytic and is heat stable up to 2400 ° F / 1300 °C and down to –22 °F / –30 °C.
  • Anti-Seize is resistant to fresh and salt water.

Where to use

Anti-Seize is recommended for use in all Engineering outlets, Building sites, Scaffolding companies and anywhere that Machinery is subjected to severe weather variations.

Anti-Seize can be used in any Industrial outlet where a high temperature, Anti-Seize lubricant is required to prevent seizure of Nuts, Bolts, and Threads etc on machinery.

How to use

Anti-Seize is very easy to use. Simply spray the parts to be protected. Components can be put back into service immediately.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

Arven Adhesive Aerosol – Heavy Duty Fabric Adhesive

Arven Adhesive Aerosol

Heavy Duty Carpet, Underlay and Fabric Adhesive

Formulated to ensure top quality, permanent and temporary adhesion.

The Benefits

Arven Adhesive will adhere to Wood, Stone, Concrete, Plaster, Tiles and Brickwork.

Arven Adhesive has been designed for use on Foam backed Carpet, Carpet tiles, Foam underlay, Felt, Textiles and Fabrics.

Arven Adhesive can be used for both long term and short term fixing.

Where to use

Arven Adhesive is recommended for use in all Soft furnishing outlets including Flooring companies, Carpet manufacturers, Industrial unit refurbishers, Office planners, Painting and Decorating firms, Snooker / Pool table production and anywhere that fabrics need to be fixed to Walls, Floors and other surfaces.

Arven Adhesive is unsuitable for use on Plasticised PVC and Polystyrenes.

How to use

Arven Adhesive is easy to use. Spray from approximately 20-50cm.

Arven Adhesive should be sprayed onto -
(a) Both surfaces for a permanent bond.
(b) One surface for a temporary bond.

Before bonding, leave for 3-5 minutes or until tacky.

Invert can when finished and spray for 2 seconds to avoid nozzle blockage.

Arven Adhesive is easily removed from surrounding areas by the use of a good quality solvent such as Lecfast 35.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

Arven FSL Aerosol – Food Safe Lubricant

Arven FSL Aerosol

Food Safe Lubricant

Special formulation for use on equipment used throughout the food industry.

The Benefits

  • Arven FSL prevents the build up of frictional Static.
  • Arven FSL stops sticking problems on all Machinery used in Folding, Bag making, Printing, Spinning, and Wrapping.
  • Arven FSL is formulated entirely from edible substances.
  • Arven FSL is extremely economical. Only a thin film is required for long lasting lubrication.
  • Arven FSL will not go rancid and will not taint or contaminate food.
  • Arven FSL is heat stable.
  • Arven FSL does not support bacterial growth.
  • Arven FSL conforms to the FSL regulations and the Emulsifiers & Stablisers in Food regulations 720. 1962.

Where to use

Arven FSL is recommended for use on all types of Machinery handling Plastic film, Sheet plastic, Foil, Cardboard and Paper.

Arven FSL is used in the Printing industry to prevent paper dust pick up.

Arven FSL can be used anywhere in the Food industry to lubricate any moving parts on machinery.

How to use

Arven FSL is very easy to use. Simply spray from a distance of 30cm onto the Machinery or Component to be lubricated.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

Arven QFC Aerosol – Quick Break Foam Cleaner

Arven QFC Aerosol

Quick Break Foam Cleaner

Advanced, multi-purpose, hard surface cleaner.

The Benefits

Arven Quick Break has been specially formulated to quickly penetrate and remove heavy layers of grease and grime on hard surfaces

Arven Quick break has Anti-Static properties.

Arven Quick Break has a controlled break Foam, which allows for fast application without excessive run off.

Where to use

Arven Quick Break will clean most surfaces in both horizontal and vertical planes.

Arven Quick Break can be used in Agriculture, Chemical processing, Construction, Metal working, Refrigeration and Local councils.

How to use

Arven Quick Break is very easy to use. Simply spray onto the surface area from approximately 20-30cm. Allow a few seconds for penetration and wipe off with a damp cloth or sponge.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262