Chemicals

Arven Chemicals specialises in the manufacture of chemicals for the cleaning, janitorial, maintenance and production sectors.

As well as providing liquid and non liquid chemicals, Arven are also able to provide a wide range of aerosols.

The range of chemical products can be filtered as follows:

Liquids
Non Liquids
Aerosols

Lecplus – Electronic & Electrical Cleaner

Lecplus

Electronic & Electrical Cleaner

Designed to clean electrical equipment & to degrease all metals.

The Benefits

  • Lecplus evaporates immediately, leaving no residue.
  • Lecplus is the safe replacement for Genklene and Trichloroethane 1.1.1.
  • Lecplus does not harm the Ozone layer.
  • Lecplus will clean all Metals, leaving no residue.
  • Lecplus is recommended for use on Electronic equipment. It cleans P.C.B’s safely, leaving no residue.

Where to use

  • Lecplus can be used to clean Electrical and Electronic equipment in any industry.
  • Lecplus is also recommended to degrease Metals prior to Painting or Powder coating.

How to use

  • Lecplus - Electrical & Electronic cleaning. Spray, brush or wipe onto equipment. Allow to evaporate or wipe dry.
  • Lecplus - Metal Cleaning. Spray, brush, or wipe onto surface to be cleaned. Allow to evaporate or wipe dry.
  • Lecplus can also be used in the Arven dip tank. Submerge parts to be cleaned. Allow to penetrate. Take out and leave to evaporate

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

Lemon Fresh – Thixotropic Cleaner, Descaler & Deodoriser

Lemon Fresh

Thixotropic Cleaner, Descaler & Deodoriser

Complete cleaner for all Washroom and Shower area’s

The Benefits

  • Lemon Fresh is safe to use on all types of urinals, toilet bowls  coloured ceramics and stainless steel.
  • Lemon Fresh kills bacteria and removes unpleasant odours.
  • Lemon Fresh prevents build-up in drains and allows them to flow freely.
  • Lemon Fresh is fully biodegradable and has no harmful effect on natural bacteria in sewage systems and septic tanks.
  • Lemon Fresh is extremely economical and requires only one small squirt, which will cling to all surfaces and carry on cleaning even after flushing.
  • Lemon Fresh removes body fats from Shower units, Tiles and Floors.
  • Lemon Fresh will remove soaps, scale, algae, rust and copper stains from contaminated area’s.

Where to use

Lemon Fresh is recommended for use as a general purpose cleaner in Hospitals, Leisure Centres and Offices to clean Washrooms, Shower Units, Toilets, Walls and Floors to maintain a high standard of hygiene.

How to use

  • Lemon Fresh is very easy to use. Simply spray on to area to be cleaned, allow to soak and flush away.
  • Lemon Fresh  should be squirted under the rim of toilet bowls to eliminate scale build up.
  • Lemon Fresh  used daily will ensure no further build up of stains and bacteria. It will also leave a pleasant fragrance that will last all day.

Full instructions are on the Container.

Enquire

To buy or enquire about a product call:
01928 576262

Line Marker Aerosol – Quick Drying Paint

Line Marker Aerosol

Quick Drying Paint for Machine or Free Hand Application

Designed to stencil demarcation lines on most surfaces.

The Benefits

  • Line Marker dries extremely quickly.
  • Line Marker gives long lasting wear against heavy traffic.
  • Line Marker is very economical. One Aerosol will cover 50-85 metres at 5cm wide.
  • Line Marker keeps labour costs to a minimum. Each Aerosol can be dispensed in 2 minutes.
  • Line Marker is available in a wide range of Colours.

Where to use

Line Marker can be used in all forms of business both Domestic and Commercial including, Factories, Bus stations, Roads, Car parks, Sports fields, Playgrounds, Tennis courts, Golf clubs, Leisure centres and Warehouses.

How to use

  • Line Marker must be used on surfaces that are clean, dry and free from dust.
  • Shake can vigorously for 1-2 minutes.
  • Stand upright to fit nozzle.
  • Invert Aerosol and fit to applicator.
  • Pull trigger for action.
  • Speed of movement controls density of lines.
  • If Aerosol blocks, remove from applicator and stand upright. Spray for 2-3 seconds to clear nozzle.
  • After use, always remove nozzle and store Aerosols on their sides to prevent blocking.

Full instructions are on the Pack.

Enquire

To buy or enquire about a product call:
01928 576262

Lube-X – Scaffolding Lubricant & Concrete Release Agent

Lube-X

Scaffolding Lubricant & Concrete Release Agent

The Benefits

  • Lube-X is specially designed to be a cost effective, high performance scaffold lubricant and concrete release agent.
  • Lube-X will easily find ways into all the crevices that other penetrants fail to reach, bringing “dead” clips back to life.
  • Lube-X does not dry and leaves a protective coating.
  • Lube-X is extremely economical requiring only a short spray to release even the most stubborn clips and brackets.
  • Lube-X allows clips to be left out even in severe weather conditions
  • Lube-X provides a quick positive release of formwork, precasts or moulds, reducing labour costs and damage when used as a release agent.
  • Lube-X boasts effective and extremely economical coverage rates.
  • Lube-X will reduce the occurrence of pinhole effects and surface blemishes.

Where to use

  • Lube-X can be used in any industry where a long lasting lubricant is required. It will protect all metals from rust and corrosion.
  • Lube-X can also be used as a release agent for use on concrete formwork which is non-staining for a high quality cosmetic finish.

How to use

  • Lube-X can be sprayed in situ where applicable to release clips and fittings seized by adverse weather conditions.
  • Lube-X is recommended to be used in a dip tank, simply immerse Clips or other fittings into the solutions and leave to soak. This lubricates and protects fittings from further weathering.
  • Lube-X is easy to use as a release agent. Simply brush or spray evenly onto a specific application before and between subsequent castings. (Do not over apply).

Full Instruction are on the Drum

Enquire

To buy or enquire about a product call:
01928 576262

Metshield – Anti-Corrosion Shield

Metshield

Anti-Corrosion Shield

Long term, all weather metal protection.

The Benefits

  • Metshield resists Salt, Acids and Alkalis.
  • Metshield will give Metals outdoor protection for up to 18 months.
  • Metshield is very economical, 1litre will cover 65 sq metres.
  • Metshield is completely biodegradable and has no harmful effects on bacteria in sewage systems and septic tanks.
  • Metshield is easily removed after use.

Where to use

  • Metshield has been designed for use on Machined metal parts and Metal fabrications liable to be stored for lengthy periods, both indoors and outdoors.
  • Metshield is particularly recommended for use on Bright machined components to remove soluble oils and moisture. It will then give complete protection against corrosion.

How to use

  • Shake well before use as this is a 2 phase product so will split when not in use.
  • Metshield can be sprayed, brushed or used in a Dip Tank. The protective coating is dry in only 30 minutes.
  • Metshield can be easily removed by the use of a top quality solvent such as Lecplus. In most cases the removal of the solution is not necessary before putting parts into service.
  • Metshield if used in an Arven Dip Tank, will send the displaced water to the bottom and can be run off periodically.

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262

MFR & MFR 3 – Machine & Road Film Remover

MFR

Machine & Road Film Remover

Highly concentrated, multi-purpose, exterior cleaner.

The Benefits

  • MFR is Non-toxic and Non-flammable.
  • MFR is fully biodegradable and will not harm the natural bacteria in sewage systems and septic tanks.
  • MFR is extremely economical with a dilution rate of 150-1.
  • MFR is safe on all Painted surfaces in diluted form.
  • MFR can be used through all Power washers and Spray equipment.

Where to use

  • MFR is recommended for use in all types of industry to clean Cars, Tankers, Bulk carriers, Road signs, Crash barriers and Garage forecourts.
  • MFR will clean and refurbish Photocopying machines.
  • MFR will also clean Carpets and Soft furnishings.
  • MFR can be used in the Printing and Packaging industries, for the cleaning of inks.

How to use

  • MFR is easy to use. Simply dilute up to 150-1 depending on the degree of contamination and apply to the area to be cleaned. Allow to penetrate and rinse off with water. When cleaning vehicles, start at the bottom and work up. Allow to penetrate and rinse off with water to leave an immaculate, streak free finish.
  • MFR can be used on most carpets and soft furnishings. Test a small area before spraying or wiping on to surface to be laundered, allow to soak in and wipe or vacuum clean.
  • MFR is available in 205lt Drums or 1000lt IBCs.

Also available:

MFR 3 with a dilution rate of 20-1

Full instructions are on the Drum.

Enquire

To buy or enquire about a product call:
01928 576262