Clipbrite

Powerful Scaffold Fittings  Cleaner & Brightener.

Penetrates quickly to removes Rust. Concrete, Cement and all other contaminates from Scaffolding Fittings.

The Benefits

• Clipbrite is non-toxic, non-caustic and contains no mineral acids or solvents.
• Clipbrite is fully biodegradable.
• Clipbrite prevents re-rusting of clips and fittings.
• Clipbrite extends equipment life by refurbishing old fittings which, would otherwise be thrown away.

Where to use

Clipbrite is recommended for use in all Industries where metal components are subject to outside use and storage in all weather conditions such as Scaffolding, Engineering, Building and Rail Companies.

How to use

Clipbrite is simple to use, immerse the tubes, clips or other equipment in the solution until they are clean and bright. We recommend that the fittings are then coated with Cliplube to lubricate and protect them from further weathering.

Cliplube

Superior Scaffolding Lubricant & Penetrating Oil

Specially formulated for the Scaffolding industry to release clips and brackets. Will also leave a long lasting lubrication.

The Benefits

Cliplube will easily find ways into all the crevices that other penetrants fail to reach, bringing “dead” clips back to life.

Cliplube does not dry and leaves a protective coating.

Cliplube is extremely economical requiring only a short spray to release even the most stubborn clips and brackets.

Cliplube allows clips to be left out even in severe weather conditions.

Where to use

Cliplube can be used in any industry where a long lasting lubricant is required. It will protect all metals from rust and corrosion

Full Instruction are on the Drum.

D-Crete

Heavy Duty Concrete Cleaner

Removes Concrete and Cement from all surfaces. 

The Benefits

• D-Crete quickly removes Concrete, Cement, Rust, Scale and Algae.
• D-Crete has no harmful fumes and is safe to use in all types of atmosphere.
• D-Crete can be left in an open dip tank for over two years.
• D-Crete is highly concentrated and can be diluted 8-1 with water.
• D-Crete removes unsightly Efflorescence from Brickwork.
• D-Crete is completely biodegradable and has no harmful effect on the natural bacteria in Sewage systems and Septic tanks.
• D-Crete is safe on hands and skin.

Where to use

• D-Crete cleans Trucks, Mixers, Concrete forms, Bricks, Scaffolding clips and brackets, Metals, Boilers, Water meters and Tubing.
• D-Crete can be used to remove Efflorescence, Mortar and Concrete stains from Brickwork and will not harm joints.
• D-Crete can also be used to remove Moss and Algae from Patios, Bricks and Stone floors etc.

How to use

• D-Crete is easy to use. Simply spray on or brush in to the area to be cleaned. Allow to penetrate and rinse off with water.
• D-Crete can also be used in a dip tank. Allow to soak until clean and rinse off with water. 

Full instructions are on the Drum.

D-Foam 1

Silicone Based Anti-Foaming Agent
 
The Benefits

• D-Foam 1 is partially biodegradable and environmentally friendly provided relevant local regulations are complied with.
• D-Foam 1 is effective over a wide range of  pH and temperature.
• D-Foam 1 controls foam at low levels of addition.
• D-Foam 1 does not present any special disposal conditions other than relevant local regulations.
• D-Foam 1 can be used through all dispensing equipment.

Where to use

• D-Foam 1 is recommended for use in Fermentation, Production, Effluent plants, Waste disposal outlets and anywhere that foaming occurs.
• D-Foam 1 can be used in Industrial and Commercial business to remove foam caused by high pressure cleaning operations.

How to use

D-Foam 1 is easy to use. Simply add D-Foam 1 as and when required, either by manual application or automatic dispensing equipment.

Full instructions are on the Drum.

D-Foam 2

Silicone Based Anti-Foaming Agent

Benefits

D-Foam 2 is a Silicone based D-Foam designed specifically for use where excessive foaming occurs in Effluent Plants and Landfill Sites. 

Where to use

D-Foam 2 is recommended for use in Water Treatment Plants and Landfill Sites.

How to use

D-Foam 2 is easy to use. Simply add D-Foam 2 as and when required, either by manual application or automatic dispensing equipment.

Full instructions are on the Drum.

D-Grease

Heavy Duty Degreaser

Formulated to remove grease and sludge from metal, concrete and many other surfaces.

The Benefits

• D-Grease comes in a highly concentrated form with no need for hard scrubbing or rubbing.
• D-Grease sets to work immediately, even on well congealed Oil and Grease. Lighter coatings will dissolve almost at once.
• D-Grease is biodegradable.
• D-Grease can be diluted 10-1 with Paraffin, Gas oil or Diesel, making it very economical to use.

Where to use

D-Grease has been formulated for use in Garages, Workshops, Engineering companies and out on site to remove Grease, Sludge, Oil and many other types of dirt from Engines, Machinery, Storage tanks and Concrete.

How to use

D-Grease is very easy to use. Simply spray or brush onto the area to be cleaned. Allow to penetrate and wipe or rinse off with water. 

Full instructions are on the Drum.